The motor is a little bit smaller than the previous Domel motors fitted to the Automatic X series..
The pedal is secured by the short axle attached to that wheel in the shot above..Undo that screw, and the axle comes out.. And in so doing, releases the pedal.. Fitting your new pedal is simply a reverse of the above, taking note of where the spring sits as you slide the axle through it and secure the screw once again.. And that’s it, how to fit a replacement pedal on a Sebo X7..
The Sebo Shop at Manchester Vacs are approved Sebo dealers offering next day UK delivery on all domestic and commercial Sebo vacuum cleaners and parts.You can shop for Sebo vacuum cleaners or spares by clicking.How to fix the bag full light on a Sebo X1 or an X4: If you have a Sebo X1 or an early X4.(which are 1300w models not later 1100w models).
and your bag full light is coming on causing the machine to cut out, we are going to show you how to fix this.. Before adjusting it, we like to show people this video to be sure the machine isn’t blocked:.absolutely sure.
that the machine isn’t blocked, and your machine is an X1 or early 1300w X4, here’s what to do.. Take off the top of the body.
Undo the four screws in the recessed holes underneath using a Philips screwdriver.. Recline the neck.. Now the top comes off like so.Just pop down any time we are open and you can pick up what you need.
We’re not that far from., hop on the M60 at Ashton and you’ll be here in minutes.
If you prefer to buy spares online, there’s a banner for our online shop below.. Further reading: Our main website homepage is.Our repair information page is.
(Editor: New Blenders)