Hoover has also incorporated magnets into the motor design to reduce vibrations, although we found it hard to say how much difference this really makes.. At just under 42cm, the H-Handy is a good length for reaching both floors and higher areas.
You’ll need to ensure that the bar is correctly aligned with the spindle on the other end of the floorhead.. Once re-fitted, use a coin to turn the lock back into the correct position.And you’re done!.
The Vax Blade 4 is a cordless stick vacuum that’s at the lower end of the price spectrum.It performs decently for the price, making it a popular option for people who don’t want to spend a fortune on a Dyson or Miele cordless..When hair becomes tangled around the brush bar, it can prevent the bristles from digging into carpet fibres.
This reduces performance and makes your Vax less effective on carpets.. For this reason, it’s important to regularly remove caught fibres using the method outlined above.Here’s a quick recap:.
Always make sure the vacuum is switched off before performing any maintenance..
Remove the floorhead from the vacuum.. Use a coin to unlock the brush bar and slide it out of the floorhead.. Run scissors along the groove in the brush bar and cut away tangled hair.. Use a dry cloth to wipe the inside of the floorhead.You can also use a damp cloth to wipe it down.
make sure you don’t get the two electrical contacts on the upper rim wet..Allow the dust canister enough time to completely dry (at least 24 hours), otherwise dust will just re-stick to the sides as soon as you switch the vacuum on.
There’s also a risk of moisture getting into the vacuum motor..The main body of the vacuum, containing the motor, battery, and post-motor filter should not be cleaned with water.
(Editor: Stackable Thermostats)